All fabrics used in our external roller blinds are of the highest quality and are designed to withstand our climate and weather conditions.

As with any blind these specifications are determined by the fabrics used in manufacture. As clients are becoming more aware and concerned with the impact they are having on the environment they are beginning to understand the benefits of External Shading Solutions.

This is proving to be particularly evident in matters concerning carbon and greenhouse gas emissions. These type of systems are more effective than conventional internal blinds in that they act to reduce not only solar glare and transmission but they also contribute markedly to the reduction of heat gain through glass.


Cabrera Close-up

The heavy duty folding arms of Cabrera use Dyneema connections for superior strength and durability, while powerful springs ensure excellent fabric tension. Cabrera and Cabrera XL are awnings that will adorn any home or commercial building.

The selection of materials and components used in manufacture are anti-corrosive and highly durable.

Both Cabrera and Cabrera XL come with motorised controls as standard, with options for internal or external hard wired or remote control operation.

Both awnings are easily installed directly onto the wall with the standard Cabrera having two end brackets, while the Cabrera XL has installation brackets easily fitted anywhere along the back of the awning.


Exterior Venetian

The EV External Venetian Series heralds a new era in attractive and versatile shading solutions. Available with either 100mm Flat, 80mm Roll formed or 120mm Wind Stable Slats and with the options of side Channels, Wire Guides, Ladderbraid or Kevlar HagoFixing.

Features of the external venetian blind collection include:

•  Available with either side channels or wire guides.
•  The robust powdercoated and stove enamelled slats can be adjusted by switch or remote control.
•  The incorporation of sun and wind sensors means optimal operating parameters can be achieved automatically.
•  Profiles, side channels and pelmets are manufactured using non-corrosive aluminum alloys and can be powder-coated to match their settings.
•  All components are either corrosion resistant or made from synthetic materials.



We would welcome the opportunity to provide you with no obligation quotation and to answer any questions you may have about this product.

Ph:          6278 8887
Hours:    Mon – Thurs 8.30 – 5.00, Fri 8.30 – 4.00
Email:     enquiries@taylorscreens.com.au